Çift Kiriş Gezer Köprülü Portal Vinçler

Double Girder Gantry Cranes

Heavy lifting for open yards and sites without runways

Double girder gantry cranes travel on ground rails on their own legs, with a hoist trolley running on two girders, to handle large loads in open storage yards, shipyards and heavy industry. LIFTKON designs each gantry crane for your site and loads.

A double girder gantry crane carries its bridge girders on legs and runs on rails laid on the ground, so it needs no building columns. That makes it ideal for open storage yards, marble quarries and plants, shipyards and outdoor loading areas. The hoist trolley running on two main girders provides high capacity and hook height.

Design

Girders and legs are sized to DIN and FEM principles, taking site wind and operating conditions into account. The span between the legs, cantilever extensions beyond the legs and lifting height are determined per project. Long travel is provided by a gantry crane travel drive unit or, for heavy loads, a bogie travel drive unit; lifting is handled by a double girder crane trolley.

Power and controls

Power along the site is usually supplied by a cable reel. The crane can be operated by radio remote control or from an operator cabin; for outdoor use, extra safety equipment such as wind sensors and rail clamps can be added.

Typical applications

LIFTKON gantry cranes are used for block handling in marble and natural stone plants, in steel stockyards and in heavy fabrication areas. See delivered projects in our references and request a quote with your site dimensions.

Advantages

  • No building requiredRuns on its own legs, so no columns or runway girders are needed outdoors.
  • High capacityThe double girder structure lifts heavy loads in a balanced, stable way.
  • Cantilever optionExtending the girder beyond the legs enlarges the loading area.
  • Built for outdoor useCoating, protection and safety equipment for outdoor conditions.

Applications

  • Marble and natural stoneBlock and slab handling, stockyards.
  • ShipyardsBlocks, plates and equipment.
  • Steel works and rolling millsBillet, section and coil yards.
  • MiningOutdoor material handling.
  • Industrial stockyardsOutdoor loading and unloading.

Industries

Options

  • Cantilever extensionOn one or both sides.
  • Radio remote control or cabin
  • Cable reelPower supply along the site.
  • Wind sensor and rail clampFor outdoor safety.

Safety

  • Overload protection
  • Hoist and travel limit switches
  • End stops and buffers
  • Warning light and siren
  • Emergency stop

Gallery

Frequently asked questions

What is the difference between a gantry crane and an overhead crane?
An overhead crane runs on runway girders supported by the building columns; a gantry crane runs on its own legs on rails laid on the ground. Gantry cranes are used where there is no building or runway structure.
Does a gantry crane need foundations?
Yes. Rails must be installed on concrete foundations suited to the wheel loads. We provide wheel loads at the design stage.
What determines the price of a double girder gantry crane?
Capacity, span between legs, cantilever lengths, lifting height, travel length, speeds and control type.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.