ISC Metalurji — LIFTKON vinç 1

Crane Hook Block

Hook, sheave and housing assembly that carries the load

The crane hook block is the assembly of hook, sheaves and housing that carries the load via the rope reeving. It is built with single or multiple sheaves according to capacity and reeving.

A hook block consists of sheaves for the hoist rope, a housing (side plates), a swivelling hook and a safety latch. The number of sheaves in the reeving is set together with capacity and lifting speed, and the hook block is designed to match.

Selection

Capacity, rope diameter and reeving (e.g. 2/1, 4/1), duty class and hook type (single or double) determine the selection. The hook block must work in harmony with sheave blocks, steel wire rope and the rope drum.

Inspection and maintenance

Hook throat opening, cracks or deformation, latch function, sheave bearings and hook rotation must be inspected periodically. For hook block replacement, submit a service request or request a quote.

Selection and application

The data that drive the selection of a Crane Hook Block are the crane’s capacity, duty class (FEM/ISO), travel speed and mounting dimensions. The duty class states how many hours the part must withstand a given load cycle and feeds directly into material, heat treatment and section size. Two cranes of the same capacity in different duty classes do not use the same part.

LIFTKON produces this part both for its own cranes and for other makes already in service. A correct match needs the crane make, capacity, serial number if available and the dimensions of the existing part; a photograph of the worn part also helps. A sketch or drawing can be attached to the quotation form.

Advantages

  • Designed for the reeving
  • Hook with safety latch
  • Swivelling hookMakes load positioning easier.

Applications

  • Overhead and gantry cranes
  • Crane trolleys
  • Hook replacement and renewal

Options

  • Single or double hook
  • Single or multi-sheave block

Safety

Inspect hook opening, deformation and safety latch at every periodic inspection.

Frequently asked questions

When should a hook block be replaced?
When the hook throat has opened, or cracks, deformation, wear or damaged sheave bearings are found.
Can I raise capacity by changing the hook block?
Capacity upgrades must be assessed together with the whole hoist unit, bridge and runway.
What information is needed to select the right part?
The crane make, capacity, duty class and the mounting dimensions of the existing part. A serial number and a photograph of the worn part speed up the match.
Does it fit cranes of other makes?
Yes, as long as the dimensions and the duty class match. Compatibility is checked beforehand from a dimensioned sketch or a photograph of the existing part.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.