Portal Vinç Yürütme Grubu

Bogie Travel Drive Unit

Balanced travel system spreading wheel loads on heavy cranes

The bogie travel drive unit spreads wheel loads across several wheels on heavy-duty overhead and gantry cranes, reducing the wheel loads on rails and building structures.

As crane capacity and span increase, so does the load on each wheel. A bogie travel drive unit increases the number of wheels under the bridge or gantry leg using balance beams and distributes the load evenly. The wheel load on the rail, runway girder and ground falls, allowing lighter rails and structures.

Use

Bogies are used on heavy-duty double girder overhead cranes, gantry cranes and heavy transfer carts. The balancing arrangement keeps the wheels in contact with the rail over irregularities and steadies travel.

Design

Number of wheels, balance layout and ratio of driven wheels are calculated for the wheel load, travel speed and rail type. Wheel blocks and geared motors are compatible with LIFTKON standard components.

Request a quote with your wheel load and rail details.

Selection and application

The data that drive the selection of a Bogie Travel Drive Unit are the crane’s capacity, span, lifting height, travel speed, daily cycles and working environment. These define the FEM/ISO duty class, and the duty class in turn defines motor power, gear ratio, wheel diameter and load-bearing sections. A unit selected on capacity alone wears early and causes unplanned downtime, so the calculation follows real usage.

LIFTKON builds this unit both for new cranes and for the modernisation (retrofit) of cranes already in service. For a retrofit the crane make, capacity, rail size and the mounting dimensions of the existing unit are needed. Drawings or photographs can be attached to the quotation form; installation and commissioning can be included in the scope.

Advantages

  • Lower wheel loadsLess load on the rail and structure.
  • Balanced travelBalance beams tolerate rail irregularities.
  • Suited to heavy capacities

Applications

  • Heavy overhead cranes
  • Gantry cranes
  • Heavy transfer carts

Options

  • Driven/idle wheel ratio
  • Variable speed drive (inverter)

Safety

  • Travel limit switches
  • Buffers
  • Rail sweepers

Frequently asked questions

When is a bogie travel unit needed?
When the wheel load exceeds what the rail or building structure can carry, a bogie spreads it over more wheels.
Can bogies be added to an existing crane?
The end carriage and runway are surveyed and suitability is determined by calculation.
What is this unit selected from?
Crane capacity, span, lifting height, travel speed, daily cycles and the working environment. These define the FEM/ISO duty class, which in turn defines motor power and gear ratio.
Can it be retrofitted to an existing crane?
Yes. A retrofit needs the crane make, capacity, rail size and the mounting dimensions of the existing unit. Where no drawing exists, a dimensioned sketch and photographs are enough.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.