Tambur Sistemleri — parça şeması (LIFTKON çizimi, ürün fotoğrafı değildir)

Drum Systems

Drum solutions for hoisting and cable systems

Drum systems cover rope drums for crane hoisting and cable reels for power supply. They are manufactured with dimensions, capacity and drive type set for the application.

Cranes use two main drum types: the rope drum that lifts the load and the cable reel that powers moving equipment. Both are designed for the capacity, speed and dimensional requirements of the application.

Rope drums

Helically grooved drums matching the rope diameter are sized for lifting height and reeving and integrated into the hoist unit with the gearbox connection.

Cable reels

Spring or motor driven cable reels are used on equipment travelling long distances, such as gantry cranes and transfer carts.

Send us your application and dimensions and we will select the right drum system and prepare a quote.

Selection and application

The data that drive the selection of a Drum Systems are the crane’s capacity, duty class (FEM/ISO), travel speed and mounting dimensions. The duty class states how many hours the part must withstand a given load cycle and feeds directly into material, heat treatment and section size. Two cranes of the same capacity in different duty classes do not use the same part.

LIFTKON produces this part both for its own cranes and for other makes already in service. A correct match needs the crane make, capacity, serial number if available and the dimensions of the existing part; a photograph of the worn part also helps. A sketch or drawing can be attached to the quotation form.

Advantages

  • Application-specific design
  • Rope and cable drums from one source

Applications

  • Crane hoist units
  • Gantry crane and transfer cart power supply

Frequently asked questions

Which drum type do I need?
Rope drums lift loads; cable reels supply power to moving equipment. Share your application and we will decide together.
What information is needed to select the right part?
The crane make, capacity, duty class and the mounting dimensions of the existing part. A serial number and a photograph of the worn part speed up the match.
Does it fit cranes of other makes?
Yes, as long as the dimensions and the duty class match. Compatibility is checked beforehand from a dimensioned sketch or a photograph of the existing part.
Why do cranes of the same capacity use different parts?
Capacity alone is not enough; the duty class is what determines service life. A crane making two lifts a day and a crane in continuous service do not use the same part.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.