Vinç Kaldırma Redüktörü — parça şeması (LIFTKON çizimi, ürün fotoğrafı değildir)

Crane Hoist Gearbox

The heart of the hoist: high-torque crane gearbox

The crane hoist gearbox transmits motor power to the rope drum at high torque and low speed. Selecting it to suit the crane's duty class determines the life of the hoist unit.

The hoist gearbox converts the high speed of the electric motor into the low speed and high torque the drum needs. Because of repeated starts, stops and load changes, it is one of the most heavily stressed crane components.

Selection

The gearbox is selected by lifting capacity, hoisting speed, reeving (sheave system) and the crane's duty class. The output shaft connection to the rope drum and mounting position are defined together with the hoist unit design.

Maintenance

Oil level and change intervals, sealing, bearing noise and temperature should be checked periodically. For gearbox replacement and overhaul on existing cranes, submit a service request; for a new hoist unit, see our crane trolleys.

Selection and application

The data that drive the selection of a Crane Hoist Gearbox are the crane’s capacity, duty class (FEM/ISO), travel speed and mounting dimensions. The duty class states how many hours the part must withstand a given load cycle and feeds directly into material, heat treatment and section size. Two cranes of the same capacity in different duty classes do not use the same part.

LIFTKON produces this part both for its own cranes and for other makes already in service. A correct match needs the crane make, capacity, serial number if available and the dimensions of the existing part; a photograph of the worn part also helps. A sketch or drawing can be attached to the quotation form.

Advantages

  • High torque
  • Selected for the duty class
  • Long lifeWith correct selection and maintenance.

Applications

  • Crane hoist units
  • Crane overhaul and renewal

Options

  • Different mounting positions

Frequently asked questions

What should be considered when replacing a gearbox?
Ratio, torque capacity, duty class, shaft connection and mounting dimensions must match the existing hoist unit.
When should the gearbox oil be changed?
According to the manufacturer's instructions and usage; oil level and condition should be checked at periodic maintenance.
What information is needed to select the right part?
The crane make, capacity, duty class and the mounting dimensions of the existing part. A serial number and a photograph of the worn part speed up the match.
Does it fit cranes of other makes?
Yes, as long as the dimensions and the duty class match. Compatibility is checked beforehand from a dimensioned sketch or a photograph of the existing part.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.