Vinç Halat Sarma Tamburu — parça şeması (LIFTKON çizimi, ürün fotoğrafı değildir)

Crane Rope Drum

Grooved drum that winds the rope and lifts the load

The crane rope drum winds the hoist rope neatly in its grooves to lift the load. Its diameter and length are calculated from rope diameter and lifting height.

The rope drum rotates, driven by the gearbox, to wind and unwind the hoist rope. Helical grooves on the drum surface ensure the rope winds evenly without overlapping, which is critical for rope life and lifting safety.

Design

Drum diameter is determined from the rope diameter according to the duty class; drum length is calculated from lifting height and reeving. Shell thickness and shaft connection are sized for the load. The drum works with the hoist gearbox, steel wire rope and rope guide.

Replacement

Groove wear, cracks or uneven rope winding indicate the drum should be checked. Drums can be made to suit your existing cranes; request a quote.

Selection and application

The data that drive the selection of a Crane Rope Drum are the crane’s capacity, duty class (FEM/ISO), travel speed and mounting dimensions. The duty class states how many hours the part must withstand a given load cycle and feeds directly into material, heat treatment and section size. Two cranes of the same capacity in different duty classes do not use the same part.

LIFTKON produces this part both for its own cranes and for other makes already in service. A correct match needs the crane make, capacity, serial number if available and the dimensions of the existing part; a photograph of the worn part also helps. A sketch or drawing can be attached to the quotation form.

Advantages

  • Even windingHelically grooved surface.
  • Protects rope life
  • Made to size

Applications

  • Crane hoist units
  • Drum replacement and overhaul

Options

  • Single or double winding drum

Frequently asked questions

When should a rope drum be replaced?
When grooves are clearly worn, cracked or deformed, or the rope no longer winds properly.
Can you make a drum for my old crane?
Yes. Dimensions and rope diameter are taken and a matching drum is manufactured.
What information is needed to select the right part?
The crane make, capacity, duty class and the mounting dimensions of the existing part. A serial number and a photograph of the worn part speed up the match.
Does it fit cranes of other makes?
Yes, as long as the dimensions and the duty class match. Compatibility is checked beforehand from a dimensioned sketch or a photograph of the existing part.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.