
Lifting Beam
Safe crane handling of long and unbalanced loads
A lifting beam is a below-the-hook device for lifting long, wide or multi-point loads in balance with a crane. Hook positions are adjustable and it is built in a range of capacities.
A lifting beam (spreader beam) connects to the crane hook at one point and carries the load from several points. For long bars, sections, pipes, panels and moulds that bend or tip when lifted from a single point, it balances the load and reduces the horizontal squeeze that slings put on it.
Applications
Lifting beams are used for long materials, container lifting, lifting big bags and machine assembly. Loads can be lifted suspended or from the ground, and hook positions can be adjusted to the load size.
Design
The beam is calculated for the load, spacing of the lifting points and the crane it hangs from. For heavy long loads, two-hook operation with a double girder overhead crane can also be engineered. For coils, a C-hook is more suitable.
Request a quote with your load dimensions and weight.
Selection and application
The data that drives the design of a Lifting Beam are the weight, dimensions and gripping points of the load. Adding ambient conditions (outdoor, temperature, dust) and the number of daily cycles defines the load-bearing sections, the safety factor and the material. Because lifting attachments are carried by the crane hook or hook block, the capacity and hook size of the existing crane are part of the design as well.
LIFTKON builds the attachment together with a new crane or as an addition to a crane already in service. Sending the weight and the length/width/height of the load, the capacity of the existing crane and a photograph shortens the process. A load test and test report can be requested; the scope is agreed at quotation stage.
Advantages
- Balanced liftingReduces bending and tipping on long loads.
- Adjustable hook positionsAdapts to different load sizes.
- Range of capacities
- Corrects sling anglesReduces horizontal forces on the load.
Applications
- Bars, sections and pipes
- Big bag lifting
- Containers and moulds
- Machine assembly
Industries
Options
- Fixed or adjustable hook spacing
- Multi-hook beam
Safety
The working load must be marked on the beam and the beam weight included in the crane capacity. Periodic inspection is recommended.



