Crane Steel Wire Rope
Steel wire rope matched to the crane hoist
Crane steel wire rope is the main load-carrying element of the hoist unit. Diameter, construction and breaking strength are selected according to capacity, reeving and duty class.
Steel wire rope is made of many steel wires laid into strands. On cranes, the rope bends and straightens continuously over the drum and sheaves, so its construction and quality directly affect lifting safety.
Selection
Rope diameter and construction must match crane capacity, reeving, duty class and the diameters of the drum and sheaves. Rotation-resistant ropes reduce load spin at high lifting heights.
Inspection and replacement
Broken wires, crushing, corrosion, reduced diameter or birdcaging indicate that the rope must be replaced. For rope replacement, submit a service request or request a quote with your crane details.
Selection and application
The data that drive the selection of a Crane Steel Wire Rope are the crane’s capacity, duty class (FEM/ISO), travel speed and mounting dimensions. The duty class states how many hours the part must withstand a given load cycle and feeds directly into material, heat treatment and section size. Two cranes of the same capacity in different duty classes do not use the same part.
LIFTKON produces this part both for its own cranes and for other makes already in service. A correct match needs the crane make, capacity, serial number if available and the dimensions of the existing part; a photograph of the worn part also helps. A sketch or drawing can be attached to the quotation form.
Advantages
- Construction and diameter to suit the crane
- Rotation-resistant option
- Replacement service
Applications
- Overhead and gantry cranes
- Crane trolleys
- Rope replacement
Options
- Galvanised ropeFor outdoor and corrosive environments.
- Rotation-resistant rope
Safety
Inspect the rope for broken wires, wear and deformation at periodic inspections and replace it as soon as discard criteria are reached.

