Yürütme Grubu Vinç Setleri

Bridge Travel Drive Unit

End carriage travel unit for overhead travelling cranes

The bridge travel drive unit (end carriage) moves overhead cranes along the runway and consists of wheel blocks, end carriage beams and geared motors. Built for double girder, single girder and refurbishment projects.

The bridge travel drive unit consists of the end carriage beams, wheel blocks and geared motors that make an overhead crane travel along its runway. Stable, vibration-free crane travel and the life of rails and wheels depend largely on the quality of this unit.

Model options

Models are available for double girder box girder cranes, double girder rolled section cranes and single girder cranes; they can also be supplied separately as overhead crane end carriages. They suit crane builders and plants that want to renew the travel units of existing cranes.

Technical design

Specially designed wheel blocks increase crane stability and minimise axis misalignment in the horizontal plane. High-strength steel is used. Variable speed control gives soft starts and stops, reducing rail and wheel wear.

Request a quote with crane span, capacity and rail type.

Selection and application

The data that drive the selection of a Bridge Travel Drive Unit are the crane’s capacity, span, lifting height, travel speed, daily cycles and working environment. These define the FEM/ISO duty class, and the duty class in turn defines motor power, gear ratio, wheel diameter and load-bearing sections. A unit selected on capacity alone wears early and causes unplanned downtime, so the calculation follows real usage.

LIFTKON builds this unit both for new cranes and for the modernisation (retrofit) of cranes already in service. For a retrofit the crane make, capacity, rail size and the mounting dimensions of the existing unit are needed. Drawings or photographs can be attached to the quotation form; installation and commissioning can be included in the scope.

Advantages

  • Stable travelWheel blocks that reduce axis misalignment.
  • High-strength steel
  • Suits different crane typesDouble girder box/rolled section and single girder.
  • Ideal for refurbishmentTravel units of existing cranes can be replaced.

Applications

  • New overhead crane builds
  • Travel unit renewal on existing cranes
  • Component supply to crane builders

Options

  • Variable speed drive (inverter)
  • Buffers and rail sweepers

Safety

  • Travel limit switches
  • Buffers
  • Rail sweepers

Frequently asked questions

Do you sell end carriages separately?
Yes. Bridge travel drive units are supplied separately for new crane builds and refurbishments.
What information do you need?
Crane capacity, span, rail type, travel speed and bridge construction type.
What is this unit selected from?
Crane capacity, span, lifting height, travel speed, daily cycles and the working environment. These define the FEM/ISO duty class, which in turn defines motor power and gear ratio.
Can it be retrofitted to an existing crane?
Yes. A retrofit needs the crane make, capacity, rail size and the mounting dimensions of the existing unit. Where no drawing exists, a dimensioned sketch and photographs are enough.

Share the technical data of your project

Send us capacity, span and operating conditions — our engineering team will prepare the right solution.